Description Of The Functions; A) Function "Weather" (Symbol; Switching The Display; Setting/Adjusting The Air Pressure To Sea Level Height - Conrad TE831X Bedienungsanleitung

12. Description of the functions

a) Function "Weather" (symbol "


In the basic display mode of the weather station, select the function "Weather" with the button " " (6)
or " " (7). The corresponding symbol (see above) blinks.
The following setting options and displays are available now:
 Switching the display
With a brief press of the button "SET" (5), you can switch between:
• Display of the air pressure on sea level ("SEA LEVEL" appears on the display)
• Display of the air pressure at the altitude you have set ("LOCAL")
• Display of the altitude
 Setting/adjusting the air pressure to sea level height
If the air pressure at sea level is displayed (the display indicates "SEA LEVEL"), you can correct this if you know the
current air pressure in your region (obtained from radio, TV or Internet).
• Keep the button "SET" (5) depressed until the air pressure value starts to blink.
• You can correct the value with the button " " (6) or " " (7).
• Briefly press the "SET" button (5) to save the setting.
 Selecting the units for air pressure ("mmHg", "hPa/mBar" or "InHg")
If the air pressure at sea level is displayed (the display shows "SEA LEVEL"), you can select the units for the display.
• Keep the button "MEMORY" (3) depressed until the current units (e.g. "hPa/mBar") start to blink.
• With the button " " (6) or " " (7), you can select the unit of air pressure (mmHg, hPa/mBar, InHg).
• Briefly press the "MEMORY" button (3) to save the setting.
 Setting/adjusting the altitude
If the altitude is displayed, you can correct it, e.g. if you did not do so during the initial installation or if you have a more
exact value for your region.
• Keep the button "SET" (5) depressed until the altitude starts to blink.
• You can correct the value with the button " " (6) or " " (7).
• Briefly press the "SET" button (5) to save the setting.
 Selecting the altitude unit ("meter" or "feet")
If the altitude is displayed, you can select the display units.
• Keep the button "MEMORY" (3) depressed until the current units (e.g. "meter") start to blink.
• With the button " " (6) or " " (7), you can select the altitude unit ("meter" or "feet").
• Briefly press the "MEMORY" button (3) to save the setting.
68
")