Yamaha CD-S3000 Bedienungsanleitung Seite 12

Controls and functions
■ Remote control
1
2
3
AMP OPEN/CLOSE
4
DIMMER PURE DIRECT
5
1
4
6
7
0 ENTER
REPEAT PROGRAM
7
8
SOURCE
9
VOLUME
MUTE
INPUT
1 Infrared signal transmitter
Sends infrared signals to this unit.
2 p CD key
Turns this unit ON or switches it to STANDBY mode.
For details on STANDBY, see "Front panel" (page 6).
12
En
CD
@
DISPLAY
A
2 3
5 6
8 9
CLEAR
B
SHUFFLE
LAYER
C
D
3
OPEN/CLOSE key
Opens or closes the disc tray.
4 p AMP key
Turns the Yamaha amplifier ON or switches it to
STANDBY mode.
Note
Some Yamaha amplifiers cannot be controlled with the
p AMP key of this remote control.
5 DIMMER key
Selects the brightness level for the front panel display.
Each time you press the DIMMER key, the brightness
level changes in the following order:
Max (brightest)
Level 3 (darkest)
y
This setting is retained even if you turn off this unit.
6 Numeric buttons
Use to select a track directly.
Note
This operation is ineffective for MP3 or WMA discs.
7 REPEAT key
Repeats playback of a single track or all tracks. Each
time you press the REPEAT key during playback, the
repeat playback mode changes as follows:
(repeat playback off): Repeat
playback is cancelled.
(single repeat playback): On reaching
the end of the current track, playback repeats
from the beginning of the current track.
(all repeat playback): On reaching
the end of the last track, playback repeats from
the beginning of the first track.
Note
This operation is ineffective for MP3 or WMA discs.
PROGRAM key
Turns on or off the program playback mode. See
"Program playback" (page 14).
Level 1 (default)
Level 2