14. The
display
remaining preparationt ime and the actual
temperature of the cooling bowl.
15. During operation, the appliance can be
stopped at any time by pressing the START/
STOP button for at least 2 seconds.
16. During operation the freezing time can
be extendeed by pressing the time select
button (Zeitwahl) in steps of 5 minutes up
to a max. freezing time of 60 minutes.
17. The appliance turns off automatically after
the preselected time. Ten beeps will sound.
The display shows „0:00". The ice cream
can be taken out.
18. If the ice cream is still too soft, you can
restart the appliance by pressing the START/
STOP button for at least 2 seconds. Select
the desired additional freezing time with the
time select button (Zeitwahl). Then press
the START/STOP button. The appliance will
restart for the preselected time and will then
return into the initial mode.
19. If the ice is not taken out within 10 minutes
after the beeps, the automatic freezing
cleaning
1. switch off and unplug the appliance. let the
appliance cool down.
2. Do not clean the appliance, the motor block
and the cord in or under water or any other
liquid.
3. Do not use any sharp or scouring clean-
4. sers which might damage the surface.
shows
alternatingly
the
function is activated to avoid the ice cream
from melting.
20. This function cools the ice cream in steps
of 10 minutes for max. 1 hour. Then the
appliance returns into the starting mode.
21. Switch off and unplug the appliance before
taking out the ice cream.
22. To take out the ice cream first remove the
motor block und then the transparent lid by
turning it counterclockwise.
23. Take the ice cream bowl out and remove the
mixer from the ice cream.
24. Fill the ice cream into an appropriate
freezing container with lid. Do not use any
sharp tools, but preferably plastic or wood
spoons or spatulas.
25. You can now prepare new icecream, just
restart at point 1 of this chapter.
5. All removable parts except the motor block
can be cleaned in warm soapy water. The
parts are not dishwasher proof.
6. The compressor housing and the motor
block can be wiped with a damp cloth.
7. Dry all parts carefully before reassembling
the appliance.
17