C) Fm Operation - Renkforce RF-DAB-BEDSIDE1 Bedienungsanleitung

Selection of stored stations
• Push the PRESET (6) button briefly and select the desired station with the PREV (7) or
NEXT (11) button.
• Confirm your selection by pushing the button SCAN/ENTER (9).
When no station is saved on the chosen station button, the currently set station will
continue to play.
Calling station information
• Briefly push the MENU/INFO button (4) to display various types of information on the station
you just listened to on the display.
• Push the MENU/INFO button (4) once more to move to the next display.
• The contents of the displayed station information depend on the station.

c) FM Operation

Station search
• Briefly push the PREV (7) or NEXT (11) button to change the reception frequency step by
step manually. Every push of a button changes the reception frequency in steps of 50 kHz.
• Keep the PREV (7) or NEXT (11) button pushed to start station scan in the respective
direction.
• If a FM station with sufficiently strong signal is found, the scan stops and the station is played
back.
Please set weaker stations by manual station selection.
Use the menu to set if the automatic station scan is to find only strong stations or all
stations. Scanning for all stations may lead to the station scan stopping after every
frequency stop in some broadcasting areas. In this case, set the search setting to
strong stations only.
Station storage
• The device can save up to 10 FM stations.
• The station storage, selection of the stored stations and deletion of stored stations take place
as described for DAB operation.
31