Operating the appliance
GB
IE
Function switch
You can switch on the appliance using the function
switch 4, and can also set three diff erent func-
tions:
Symbol
OFF
Temperature control
Use the temperature control 3 to set the desired
■
temperature.
Timer
Use the timer 5 to set the cooking time.
Set the timer 5 to the desired cooking time.
■
Once the set time has elapsed, a beep sounds
and the appliance stops heating.
NOTE
You can also use the timer 5 as a short-period
timer without the heating function.
–
Set the function switch 4 to
–
Set the desired time on the timer 5.
The switch of the timer 5 now rotates anticlock-
wise to "OFF". A beep sounds when the set time
has elapsed. The appliance does not heat up.
8
Meaning
"Top heat"
e.g. for grilling
"Bottom heat"
e.g. for baking cakes
"Top & bottom heat"
e.g. for baking pizza
"OFF"
The appliance is switched off .
.
OFF
Grilling and baking
CAUTION! MATERIAL DAMAGE!
►
Never place any containers or food directly
onto the fl oor of the appliance, the heating
elements or the crumb tray 8.
1) Place the crumb tray 8 in the appliance.
2) Remove the rack 9 and baking tray 0 from
the appliance. If required, cover these with
baking paper or grease the baking tray 0
with fat/oil that is suitable for baking.
NOTE
►
The oven must be pre-heated appropriate
to each dish. Refer to the guidelines in the
respective recipe. Pre-heating is useful for:
–
very short baking times,
–
crisp crusts,
–
delicate dishes that require a constant
temperature, such as souffl és.
►
If no pre-heating is required, skip step 3).
3) Allow the appliance to heat up until it reaches
the desired temperature (this takes about
10 minutes, depending on the temperature
setting):
–
Select the desired temperature using the
temperature control 3.
–
Then select the required function using the
function switch 4.
–
Use the timer 5 to set the preheat time
(approx. 10 minutes).
–
Close the glass door.
SGB 1200 A1