How To Choose Your Pattern; Straight Stitching And Needle Position - Silvercrest IAN 100137 Bedienungs- Und Sicherheitshinweise

Sewing basics

How to choose your pattern

Stitch width dial (4)

Straight stitching and needle position

Stitch width dial (4)
5 2.5 0
82 GB / IE
Stitch length dial S1-S2 (5)
Pattern
selector dial (7)
A
Stitch display (6)
Reverse
sewing lever (8)
Stitch length dial (5)
4 3 2 1
For straight stitch
selector dial (7) until it required letter "A"
appears in the stitch display (6). You can
adjust the needle position from left to
central by turning the stitch width dial (4).
Use the stitch length dial (5) to set the
stitch length.
For zigzag stitch
dial (7) until the required letter "B"
appears in the stitch display (6). Adjust
the stitch length and stitch width
according to the fabric being used.
To obtain any of the other
shown in the upper row
selection panel, turn the stitch selector
dial (7) until the selected letter appears in
the stitch display (6). Adjust the stitch
length and the stitch width with the
control dials according to the result
desired. To obtain best possible results
for the decorative stitches G-K in the first
row, the stitch length should be set
between 0.3 and max. 0.5.
To obtain any of the
second row , turn the stitch length dial (5)
to "S1". To obtain any of the
the third row
(5) to "S2" and turn the stitch selector dial
(7) until the desired letter appears in the
stitch display (6). Set the stitch length as
required.
Turn the stitch selector dial (7) to "A"
(straight stitch).
Generally speaking, the thicker the fabric,
thread and needle, the longer the stitch
should be.
0.5
Select the needle position from left to
right by changing the stitch width dial (4)
from "0" to "5".
, turn the stitch
, turn the stitch selector
patterns
on the stitch
stitches on the
stitches on
, turn the stitch length dial
S1