How To Choose Your Pattern; Straight Stitching And Needle Position - Silvercrest SNMD 33 A1 Bedienungs- Und Sicherheitshinweise

Sewing basics

How to choose your pattern

Stitch width dial

Straight stitching and needle position

Stitch width dial
5 2.5 0
60 GB / IE
Stitch length dial S1-S2
Pattern
selector dial
A
Stitch display
Reverse
sewing lever
Stitch length dial
4 3 2 1
For straight stitch
pattern selector dial. Adjust the stitch length
with the stitch length dial. You may choose
any needle position, by turning the stitch
width dial.
For zigzag stitch
pattern selector dial. Adjust the stitch length
and stitch width according to the fabric
being used.
To obtain any of the other
in the upper row
panel, select the letter above the stitch with
the stitch selector dial. Adjust the stitch
length and the stitch width with the control
dials according to the result desired.
To obtain any of the
second row , turn the stitch length dial to
"S1", to obtain any of the
third row , turn the stitch length dial to "S2",
select the pattern desired with the pattern
selector dial and adjust the stitch width with
the stitch width dial.
Turn the pattern selector dial so that the
stitch display shows the "A" (straight stitch).
Generally speaking, the thicker the fabric,
thread and needle, the longer the stitch
should be.
0.5
Choose your needle position, from left
position to right needle position by changing
the stitch width dial from "0" to "5".
, select pattern " " with
, select pattern " " with
patterns shown
on the stitch selection
patterns on the
patterns on the
S1