Maintenance; Storage - Silvercrest SNM 33 B1 Bedienungs- Und Sicherheitshinweise

Maintenance

Maintenance
A
B
G
C

Storage

94 GB / IE
Important:
Disconnect the machine from the electricity supply
by removing the plug from the mains socket. When
cleaning the machine, it must always be
disconnected from the electricity supply.
Removing the stitch plate (A):
Turn the handwheel (20) until the needle is fully
raised. Open the hinged front cover and remove the
stitch plate screws with the L-screwdriver (k).
Cleaning the feed dog (B):
Remove the bobbin case and use the brush (n)
supplied to clean the whole area.
Cleaning and lubricating the catch (C-G):
Remove the bobbin case. Snap the two catch
retaining arms (C) outwards. Remove the shuttle
race cover (D) and the catch (E) and clean with a
soft cloth. Lubricate at the points indicated (F) (1-2
drops) using sewing machine oil. Turn the
handwheel until the shuttle race (G) is in the left
position. Replace the catch (E). Replace the shuttle
race cover and snap back the two catch retaining
arms. Insert the bobbin case and bobbin and
replace the stitch plate.
F
E
Important:
Fabric fluff and threads must be removed
D
regularly.
Always remove the power plug from the socket
when not using the sewing machine. Use the dust
cover (s) provided. Store the sewing machine in a
dry location which children cannot access. If the
sewing machine is not used for an extended period,
it should be protected from excessive dust, dirt or
moisture.