Programs; Manual Mode; Beginner Mode - Tunturi Pure Cross R 4.1 Betriebsanleitung

Programs

• Power on the display or use reset key
function to go to main menu.
• Press Up key or Down Key to select
workout program.
• Available programs are: Quick start,
Manual, beginner, Advance, Sporty,
Cardio and Watt program.

Manual mode

For Quick start you can
• Press Start/ stop key to start workout
without any preset setting..
During workout you can press Up/ Down
key to adjust resistance level.
Quick start mode stops when, no input
for longer than 4 minutes or when Start/
stop key is pressed.
When settings in manual mode are
required than you;
• Press Up/ Down key to select
workout program, choose Manual
mode and press mode key to enter
next setting entry for manual mode
program.
• Press Up/ Down key to preset
training time, and press Mode key to
confirm the setting.
• After confirm you can set also (also):
distance, Calories, and Pulse.
Note:
When setting more than one goal, the
training will end at first achieved goal.
Leave a goal blank and it will not be
seen as a preset limit.
• Press Start/ Stop key to start workout
• Press Up/ Down key to adjust
resistance level
• Press Start/ stop key to pause
workout.
• Press Reset key to return to main
menu. (active training data will be
lost)
Owner's manual • Pure 4.1

Beginner mode

• Press Up/ Down key to select
workout program, choose beginner
mode and press Mode key to enter
next setting menu for beginner mode.
• There can be 4 beginner modes
selected: beginner 1, beginner 2,
beginner 3, and beginner 4. Select
one by using the Up/ Down key and
confirm selected by pressing Mode
key.
• Press Up/ Down key to preset
training time, and press Mode key to
confirm the setting.
• After confirm you can set also (also):
distance, Calories, and Pulse.
Note:
When setting more than one goal, the
training will end at first achieved goal.
Leave a goal blank and it will not be
seen as a preset limit.
• Press Start/ Stop key to start workout
• Press Up/ Down key to adjust
resistance level
• Press Start/ stop key to pause
workout.
• Press Reset key to return to main
menu. (active training data will be
lost)
GB
11