Back Panel Connections - T+A E-SERIES Betriebsanleitung

ANALOG OUT
DIGITAL OUT
RS 232
E
LINK
Mains switch
Mains input

Back panel connections

Analogue output
The output sockets should be connected to the CD input sockets (INPUT) on
the pre-amplifier, integrated amplifier or receiver, maintaining the correct L/R
coding, i. e.: 'ANALOG OUTPUT L' to
'ANALOG OUTPUT R' to
Digital co-axial output for connection to an external digital/analogue converter
with an co-axial cable
Interface for firmware upgrades
Control input / output for  E
Both sockets are equivalent – one is used as input, the other one serves as
output towards other E
LINK
The primary mains switch is used to isolate the machine completely from the
mains supply.
To operate the amplifier the primary mains switch must be moved to the '1'
position.
The mains cable is plugged into this socket.
For correct connections refer to the sections 'Installation and wiring' and
'Safety notes'.
'INPUT L'
'INPUT R'
– systems:
LINK
devices.
39