IKEA LAGAN Bedienungsanleitung Seite 9

ENGLISH
Electronic adjustment
1. Press the on/off button to activate the
appliance.
2. If necessary, do the Reset function.
3. Press and hold Program until the pro-
gramme indicator
flash and the programme indicator
comes on with fixed light.
4. Wait until the programme indicator
goes off and the end indica-
tor starts to flash. The programme indi-
cator
5. Press Program. The end indicator starts
to flash. The intermittent flashing of the
end indicator refers to the current set
level.
• E.g. 5 flashes + pause + 5 flashes =
level 5.
6. Press Program again and again to
change the setting. Each time you press
Program the level number increases.
7. Press the on/off button to deactivate the
appliance and to confirm the setting.
Filling the salt container
Caution! Water and salt can come out
from the salt container when you fill it.
Risk of corrosion. To prevent this, after the
replenishment, start a programme.
1
starts to
continues to flash.
2
3
Put 1 litre of water
in the salt container
(only for the first
time).
5
Filling the rinse aid dispenser
1
3
4
Put 1 kg of salt in
the salt container.
6
2
4
9