Operation; Stand Alone-Mode - EuroLite LED PMC-16x30WCOB RGB Bedienungsanleitung

OPERATION

After you connected the LED PMC-16X30W COB RGB to the mains, it starts running.
The LCD display lights up and you can choose the desired mode via the buttons MODE, ENTER, UP and
DOWN.
The device has two operating modes. It can be operated in Stand Alone Mode via the Control Board or in
DMX-controlled mode via every standard DMX controller

- STAND ALONE-MODE

Static colors/Internal programs
Auto Mode
Sound Mode
Slave Mode
- DMX MODE
STAND ALONE-MODE
Static colors / Internal programs
A chaser is a sequence of different steps that will be called up one after another in a continuous loop. With
the LED PMC-16x30W COB RGB, you can select up to 14 different chasers plus static colors.
Selecting a chaser
Press the MODE button to select the internal program mode. Select the desired chaser (P01 – P15) via the
UP or DOWN buttons (see following graphic).
Press the ENTER button to select speed and flash settings, respectively. You can select the desired values
via the UP or DOWN buttons.
Speed from 01 to 99, increasing.
Flash from 00 to 99, increasing.
Please press the ENTER button to confirm and to exit this mode.
01 Static colors
02 Dream
03 Meteor
04 Fade
05 Change
06 Flow 1
07 Flow 2
08 Flow 3
09 Flow 4
10 Flow 5
11 Flow 6
12 Flow 7
13 Flow 8
14 Flow 9
15 Flow 10
Blackout, red-green-blue-yellow-cyan-purple-white;
CL: RGB Flash 00 - 99
Seven color dreaming
Seven color flow
Seven color fade
Seven color change
Seven color chase in 1 direction
Seven color chase in 2 directions
Seven color chase relay in vertical direction
Seven color chase relay in horizontal direction
Seven color chase from 2 sides to the middle
Seven color chase from the middle to 2 sides
Seven color chase square in 1 direction
Seven color chase relay/square from the inside to the outside
Seven color chase diagonal in 1 direction
Seven color chase diagonal in 2 directions
23/27 00069590.DOC, Version 1.0