Cutters Edge CE2165RS Betrieb Und Wartung Seite 27

CUTTERS EDGE
®
TOOL-LESS GUARD/DEPTH GAUGE
Installation, Operation & Maintenance
(1) Outer Section
(4) Safety Pin
Guard/Depth Gauge Parts
(1) Outer Section
(2) Inner Section
(3) Adjusting Knob with Washer
(4) Safety Pin
(5) Safety Lanyard
CUTTERS EDGE
®
Guard/Depth Gauge
The Cutters Edge Tool-less GUARD/DEPTH GAUGE
has been designed, engineered and carefully tested to
provide increased safety and efficiency in firefighting
and rescue applications.
In its fully extended position, the Guard/Depth Gauge
completely covers the guide bar and cutting chain,
protecting the operator from accidental contact with
the chain. Even when retracted and set for specific
depths of cut, the Guard/Depth Gauge covers all but
the chain exposed for cutting.
The Guard/Depth Gauge allows you to set a specific
depth of cut to prevent cutting any deeper than is
absolutely necessary. This prevents possible
D-6, D-8 & D-10
(5) Safety Lanyard
Tool-less D-8, D-6 & D-10
®
CUTTERS EDGE FIRE RESCUE SAWS/
®
(2) Inner Section
(3) Adjusting Knob with Washer
weakening of the roof structure and prevents
exposure to hidden hazards like electrical
wiring and pipes.
These Guard/Depth Gauge features are
designed to provide the operator with
increased confidence resulting in faster cuts
with less worry. The operator can concentrate
more on cutting position, fire behavior and
the surrounding fire rescue environment.
®
Of course, as with any tool, it is only as safe
as its operator. You must be careful to take
all necessary safety precautions and to follow
all safe operating procedures.
These instructions are intended to help you
install and safely utilize the Cutters Edge
Tool-Less Guard/Depth Gauge
are installing it on a new Cutters Edge Saw
or upgrading an older Cutters Edge Saw.
Take the time to read these instructions
carefully. Familiarize yourself with the parts
and components of the Tool-Less
Guard/Depth Gauge
Fig. 17.
® , whether you
®
26