Charge Battery Pack; Inserting The Drive Battery - Carson FD Destroyer Buggy Betriebsanleitung

cHarge battery Pack

First connect the power adapter to the balancer charger and then
plug it into a socket.
The power LED will now glow.
Now connect the battery pack to the charger using the three-pin
plug.
The charging indicator light glows red during the charging
process. The light goes out once charging has finished. This shows
that the battery is ready to use.
WARNING!
Never leave the battery to charge unattended.
Under no circumstances should the charging time be exceeded as
overcharging damages the driving battery.

InSertIng tHe DrIVe battery

1 Remove the splint on the battery chamber lock
2 Next, remove the retaining pin
3 Open the cover
4 Now insert the battery and close the cover again
Advice
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the toy before
being charged.
• Rechargeable batteries are only to be charged under adult
supervision.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
• Regular examination of transformer or battery charger for any
damage to their cord, plug, enclosure and other parts.
GB // 18
1
2