Charge Battery Pack; Inserting The Drive Batteries; Your Transmitter - Carson X10 Ninja Betriebsanleitung

CHARGE BATTERY PACK

Beware:
For charging the battery, only use the recommended charger. Please
consider the advice of the enclosed instructions.
Charging procedure:
1 Connect the plug-in charger to wall socket.
2 Connect the battery to the charger.
3 Battery is fully charged when the status LED changes to green.
ATTENTION!
Never recharge the battery unattended.

INSERTING THE DRIVE BATTERIES

1 Insert the batteries
2 Put the battery plate on it and
3 Fix it with the screw-nuts
Advice
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the toy before
being charged.
• Rechargeable batteries are only to be charged under adult
supervision.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the toy.

YOUR TRANSMITTER

Transmitter overview
TH.REV (Travel reverse function)
ST. D/R (Restriction of steering angle)
TH D/R
(Restriction of speed)
LED
Binding button
ON/OFF
• The supply terminals are not to be short-circuited.
• Regular examination of transformer or battery charger for any
damage to their cord, plug, enclosure and other parts.
ST.REV (Steering reverse function)
Steering wheel
ST (Trim /
fine adjustment of steering)
TH (Trim /
fine adjustment of travel)
17 // GB