Cleaning of the Mixing Container (incl. Lid), Motor Base and Tamper
Cleaning of the mixing container and lid
Carefully when cleaning:
!
•
The mixing container can be cleaned with a brush or sponge under running water.
•
Do not use aggressive or abrasive cleaning agents or solvents.
•
Clean the mixing container with a mild cleaning agent (detergent) or fill 2 cups of water into the mixing container, add
some detergent, close the lid (incl. measuring beaker) and use the Pulse function a few times.
•
Always clean the mixing container directly after each use.
•
Do not clean the mixing container in the dishwasher as the detergent can damage the plastic.
•
Do not try to dismantle the blades from the container, they are fixed permanently to the mixing container.
Take care that the contacts of the motor base are dried properly, when putting on the mixing container.
Cleaning of the motor base
•
Clean the motor base with a soft and moist cloth,
•
Do not use any aggressive cleaning agents or solvents,
•
Never immerse the motor base in water or other fluids (danger of short circuit),
•
Never rinse the motor base under running water (danger of short circuit).
Cleaning the tamper TS
Rinse the tamper with running water and dry off with a cloth.
If water has entered the motor base, disconnect the power plug and contact your BIANCO service immediately.
EN
14
The stainless steel blade can cause injury!
The mixing container is not suitable for the dishwasher!