Grundig GV 440 NIC Servicehandbuch Seite 37

2.1 Connecting and Setting Up
Press these buttons on the You will see this in the display
remote control of your recorder
4. Starting the ATS tuning function
"
ATS 88 88:88
ATS , P R O G START
+
SEC PAL C +
S A T DATE
88 8 I 88:88
P R O G START
SEC PAL C +
S A T DATE
5. Enter required three digit
VIDEO Plus + code number
for the station
1 0 88 8 I 88:88
P R O G START
SEC PAL C +
....
S A T DATE
88 82 88:88
P R O G START
‚
SEC PAL C +
S A T DATE
6. Checking the TV stations
a) Select a programme position
S A
88 82 88:88
P R O G START
or ,
SEC PAL C +
S A T DATE
b) Terminate the adjustment
¢
,
Tuning to TV Stations
Explanations
The ATS tuning function starts and the
scrolling symbol » 0 « indicates that
88:88:88
S T O P the recorder is searching.
VPS
PDC
The recorder searches for all channels
on which TV stations are broadcasting,
sorts, and stores them.
88:8––– After a short period of time, the re-
corder has completed the ATS tuning
function and the first programme posi-
tion appears in the display.
» --- « appears in the display of the
recorder and you must enter the neces-
sary VIDEO Plus + code number.
The VIDEO Plus + code numbers must
be entered as three-digit numbers.
If you make an incorrect entry, press
the button to delete the code num-
ƒ
88:80 0 I
S T O P
ber.
» - -- « appears in the display of the
recorder.
88:8–––
S T O P
Repeat this procedure for the remaining
programme positions.
Once you have entered the VIDEO Plus+
codes for each of the programme posi-
tions, » O K « appears in the display of
the recorder.
Now check to see if you are satisfied
with the order in which the TV stations
are allocated.
88:CASS
S T O P
2.1.1 Connecting and Setting Up
Changing and Adding Programme Positions
This chapter will tell you how to ...
... change the order of the programme positions
(see point 1);
... enter the station identification abbreviations (see point 2);
... finetune the picture, if it is necessary
(see point 3);
... delete the data of a programme position (see point 4);
Press these buttons on the You will see this in the display
remote control of the recorder
1. Resorting TV stations
a) Select a programme position
S A 88 8 I
P R O G START
or , SEC PAL C +
S A T DATE
b) Mark the programme position
" 88 8 I
P R O G START
S TORE
SEC PAL C +
S A T DATE
c) Select a new programme position
S A 88 I 2
P R O G START
or , SEC PAL C +
S A T DATE
d) Store the TV station
"
88 I 2
P R O G START
S TORE
SEC PAL C +
,
S A T DATE
e) Confirm the VIDEO Plus+ code
number
" 8 I 2
P R O G START
S TORE
, SEC PAL C +
S A T DATE
for sets with ShowView
... activate the programme position for an external decoder
(see point 5);
... setting a television programme with manual search
(see Point 6);
... setting a television programme by hand (see Point 7).
Explanations
If you are not satified with the order of
the TV stations, you can change it.
Press the button until the TV pro-
I4:00 88:CASS
gramme you wish to "move" to another
programme position appears on the TV
screen.
The number of the programme position
I4:00 88:CASS
S T O P
flashes in the display of the recorder,
I «.
e.g.: »
PROG
I4:00 88:CASS Press the button until the number of the
"new" programme position appears in
the display of the recorder, e.g.:
I 2 «.
»
PROG
I4:00 88:C0 I 5 The TV station is stored in the new pro-
S T O P
VPS
gramme position, and the other TV sta-
PDC
tions are shifted over one position.
If you wish to sort further TV stations,
88:CASS
S T O P
repeat this procedure.