General Information; Manufacturer's Address And International Contacts; Warranty Conditions; Information On The Internet - bürkert 8220 Bedienungsanleitung

Generalinformation
4

generAl informATion

4.1 manufacturer's address and
international contacts
To contact the manufacturer of the device, use following address:
Bürkert SAS
Rue du Giessen
BP 21
F-67220 TRIEMBACH-AU-VAL
You may also contact your local Burkert sales office.
The addresses of our international sales offices are available on the
internet at: www.burkert.com
4.2

Warranty conditions

The condition governing the legal warranty is the conforming use of
the device in observance of the operating conditions specified in the
Operating Instructions.
4.3

information on the internet

You can find the Operating Instructions and technical data sheets
related to the type 8220 at: www.burkert.com
Type 8220
5

DescripTion

5.1

Area of application

The device is intended to measure the conductivity of liquids.
The device must be connected to a transmitter (type 8619 for
example).
5.2

construction

The device is made up of:
• a measuring sensor of physical quantities, made up of:
- 2 electrodes which measure an impedance in Ohm;
- a conductivity sensor which integrates a Pt1000 temperature
probe.
• a 4-pin male fixed connector;
• a nut to fix the device to the S020 fitting.
The device does not need a separate power supply. It is energized
via the remote transmitter to which it is connected.
English
7