NEFF F 3430 Serie Gebrauchsanleitung Seite 63

For butane and propane, a pressure reducer con-
forming to standards regulations in force should be
prepared. The seals must conform to standards
regulations in force.
Once the gas has been connected, check the seal
of the unions with a soap and water solution.
Using flexible pipes:
• do not allow the pipes to be constricted or
crushed;
• pipes must not be subject to tractive force or
torsional stress;
• do not allow the pipes to come into contact
with cutting or sharp edges, etc...
• do not allow the pipes to come into contact
with parts that can reach temperatures of 70 K
above room temperature; make sure the entire
length of the pipes can be inspected
Particular care must be taken to ensure leakproof
connection.
The unit must be coated in heat-resistant material
(minimum 90°C). If the appliance is installed close
to other units, the minimum space suggested in
the following diagram must be left.
63