Indicators; Gryphon™ D432/D432E Led Indicators; Beeper; Good Read Spot - Datalogic Gryphon D432 Referenzhandbuch

9.1

INDICATORS

9.1.1 Gryphon™ D432/D432E LED Indicators
The Gryphon™ D432/D432E has one green LED indicator signaling the following
reader functions:
STATUS
Power ON
Power ON with USB (without
external power supply)
Normal Function
9.1.2

Beeper

The Gryphon™ D432/D432E basic software provides beeper signals for good/wrong
reading and for indicating errors. Its tone, volume and duration can be directly
configured by using the codes given on page 65.
The application program can also manage the beeper (User Defined Beeper) when
the reader is controlled by a Host PC. It is possible to activate the beeper by sending
a command from the Host to the reader via the current communication interface.
The configuration of the User Defined Beeper does not influence or
change
Gryphon™ D432/D432E basic software.
NOTE
9.1.3

Good Read Spot

It is possible to enable a green good-read spot, which will be projected in the field of
view when the reading is successful.
BEHAVIOR
The LED lights up for 2 seconds to signal the
power supply is present.
The LED blinks until the Host accepts the device.
The LED lights up after a good decoding and will
switch off only at the next trigger press.
the functioning of the beeper
TECHNICAL FEATURES
managed by the
125