Safety Regulations; Layout; Items Supplied; Proper Use - EINHELL BT-SH 90/350 Originalbetriebsanleitung

Anleitung_BT_SH_90_350_SPK7:_
Important!
When using equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating manual with due
care. Keep this manual in a safe place, so that the
information is available at all times. If you give the
equipment to any other person, give them these
operating instructions as well.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.

1. Safety regulations

The corresponding safety information can be found
in the enclosed booklet.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
2. Layout (Fig. 1/2)
1. Base plate
2. Mounting arm
3. Locking screw
4. Power cable
5. Motor
6. Motor holder
7. Handle
8. Grinding wheel cover
9. Safety glass
10. Grinding wheel
11. Saw blade support
12. Star handle nut
13. Angle scale
14. Stop
15. ON/OFF switch
21.09.2009 9:20 Uhr Seite 15

3. Items supplied

Take all the parts out of the packaging.
Check that nothing is missing.
Saw blade sharpener
Handle (7)
Safety glass (9)
Assembly tool
Operating instructions
Safety regulations

4. Proper use

The saw blade sharpener is designed for sharpening
carbide-tipped saw blades with a diameter of 90 -
350 mm.
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
The machine must only be used for its intended
purpose! Even when the equipment is used as
prescribed it is still impossible to eliminate certain
residual risk factors. The following hazards may arise
in connection with the machine's construction and

layout:

Contact with the grinding wheel where it is not
covered.
Catapulting of parts from damaged grinding
wheels.
Catapulting of workpieces and parts of
workpieces from the machine.
Damage to hearing if ear-muffs are not used as
necessary.
GB
15