Safety Instructions Relating Specifically To The Equipment - Meister FW250M Originalbetriebsanleitung

MW-5410350-Bediene-1501 13.01.15 11:55 Seite 40
application. The correct power tool
will do the job better and safer at the
rate for which it was designed.
b Do not use the power tool if the
switch does not turn it on and off.
Any power tool that cannot be
controlled with the switch is
dangerous and must be repaired.
c Disconnect the plug from the
power source before making any
adjustments, changing accessories,
or storing power tools. Such
preventive safety measures reduce
the risk of starting the power tool
accidentally.
d Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to operate
the power tool. Power tools are
dangerous in the hands of untrained
users.
e Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool's operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
f Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
g Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions and
the work to be performed. Use of
the power tool for operations different
from those intended could result in a
40
hazardous situation.
5 Service
a Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This
will ensure that the safety of the
power tool is maintained.
Additional safety notes
This unit may not be used by people
(including children) with reduced
physical, sensory or mental capacities,
with a lack of experience and/or without
the appropriate knowledge, unless they
are supervised by someone who is
responsible for their safety or have been
instructed by such a person with regard
to how the unit is to be operated.
Children should be supervised to ensure
that they do not play with the device.
If connection cables are damaged, they
must – in order to reduce the risks – be
replaced by the manufacturer or by their
customer service representative.
6 – Safety instructions
relating specifically to
the equipment
• Use the machine for its intended
purposes only.
• When the machine is in operation,
grasp it with both hands and take a
firm stance.
• Power sockets for use out of doors
must be fitted with residual-current
circuit breaker.
• Never remove chippings or debris
when the machine is running.
• Be sure to remove the power plug
before starting to work on the machine,