AIPTEK HDDV 8000 Handbuch Seite 90

When connecting the camera to the computer or TV:
Problem
Cannot find removable
disk after connecting the
camera to a PC.
I cannot view the video
clips on my computer.
Driver installation failed.
The TV screen does not
display correctly after
connecting the camera
to the TV.
A conflict with other
installed camera or
capture device occurred.
Addenda
Cause
Batteries are not installed or
out of power.
Driver or software is not
installed on the computer.
The installation is terminated
abnormally.
The camera has been
connected to the PC via the
USB cable before installing
the driver.
The camera is not correctly
connected to the TV.
TV system (NTSC/PAL)
setting error.
The device is not compatible
with the camera.
42
Solution
Install new batteries.
Install Direct X 8.0 or above and
Windows Media 9.0 Codecs to
solve this problem. See page
33 for details on installing the
software, or go to http://www.
microsoft.com to download the
required files.
Remove the driver and other
related programs. Follow the
installation steps in the manual to
re-install the driver.
1. Remove the driver.
2. Install the driver prior to
plugging in the USB cable.
Reconnect the camera to TV
correctly.
Set the TV system to a correct
item.
If you have any other camera or
capture device installed in your
computer, please completely
remove the camera and its driver
from the computer to avoid the
conflict.