Specifications - Pioneer S-BD500FS Bedienungsanleitung

Specifications

General
Power requirements: AC 220 V to 240 V, 50 Hz/60 Hz
Stand by consumption: 0.33 W
Power consumption: 70 W
Dimensions (W x H x D): Approx. 430 x 76 x 372 mm without foot
Net Weight (Approx.): 4.6 kg
Operating temperature: 41 °F to 95 °F (5 °C to 35 °C)
Operating humidity: 5 % to 85 %
Inputs/Outputs
1.0 V (p-p), 75 Ω, sync negative,
VIDEO OUT:
RCA jack x 1
COMPONENT VIDEO OUT: (Y) 1.0 V (p-p), 75 Ω, sync negative,
RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
HDMI OUT (video/audio): 19 pin (HDMI standard, Type A)
HDMI IN (video/audio): 19 pin (HDMI standard, Type A)
2.0 Vrms (1 kHz, 0 dB), 600 Ω,
ANALOG AUDIO IN:
RCA jack (L, R) x 1
0.5 V (p-p), 75 Ω, RCA jack x 1
DIGITAL IN (COAXIAL):
DIGITAL IN (OPTICAL): 3 V (p-p), Optical jack x 1
PORT. IN: 0.5 Vrms (3.5 stereo jack)
iPod cradle (24 pin)
Tuner FM
FM Tuning Range: 87.5 - 108.0 MHz
48
Amplifier
Stereo mode: Front
PEAK Power 75 W + 75 W (4Ω 1 kHz Non CLIP)
RMS Power 60 W + 60 W (4Ω 1 kHz THD 10%)
Subwoofer
PEAK Power 150 W (3Ω 60 Hz Non CLIP)
RMS Power 120 W (3Ω 60 Hz THD 10%)
System
L
aser: Semiconductor laser,
wavelength: 405nm / 650 nm
Signal system: Standard PAL/NTSC colour TV system
Frequency response: 20 Hz to 20 kHz
(48 kHz, 96 kHz, 192 kHz sampling)
LAN port: Ethernet jack x 1, 10BASE-T/100BASE-TX
Accessories
Remote control (1), Battery (1), FM antenna (1), Video cable (1),
Cradle (1)