Warning And Safety Instructions - Miele Professional WS 5080 Gebrauchsanweisung

Warning and Safety instructions

Explanation of the Warning and Safety
symbols on the machine
It is essential to read these
operating instructions.
Please refer to specific
instructions, e.g. Installation
instructions
Caution, hot surfaces.
Caution, voltage up to 1000 volts.
Earthing
To avoid the risk of accidents or damage to
the machine read the operating instructions
through before using it for the first time.
Appropriate use of the machine
This washer extractor is only intended for
items of laundry which have not been im-
pregnated with dangerous or inflammable sub-
stances.
Only machine wash articles which pos-
sess a care label announcing they are sui-
table for machine washing.
It is the operator's responsibility to ensure
that the standard of disinfection in thermal
as well as chemo thermal procedures is main-
tained (in accordance with § 18 IFSG) by car-
rying out suitable validation tests. These
procedures should be checked on a regular
basis, either thermo-electrically using loggers,
or bacteriologically with bio indicators.
The operator must pay particular attention to
maintaining the correct parameters in the
procedure, including temperature and with
chemo thermal programmes the chemical con-
centration used.
34
Disinfection programmes must not be interrup-
ted, as this can have a limiting effect on the
disinfection result.
On no account must solvents of the kind
used for dry cleaning be used in this
machine. There may be the danger of fire or
explosion.
Never use or store petrol or petroleum ba-
sed substances or any easily inflammable
substances near the machine. Do not use the
machine lid as a resting place.
Danger of fire or explosion.
When used in a commercial environment
ensure that all operators are trained to
use the machine correctly. If the machine is
used in a publically accessible room, please
ensure that operators are able to use it safely.
Technical and electrical safety
The electrical safety of this appliance can
only be guaranteed when continuity is
complete between the appliance and an ef-
fective earthing system which complies with
local and national regulations.It is most impor-
tant that this basic safety requirement is regu-
larly tested by a qualified electrician. The ma-
nufacturer cannot be held liable for the
consequences of an inadequate earthing sy-
stem.
Do not damage, remove or bypass the sa-
fety features and controls on the machine.
Where there is any damage to the machine
or to the cable insulation the machine must
not be used until it has been repaired.
Any removable outer panels must be in
place, and all moving or electrical parts
shielded before the machine is operated.
The machine is only completely isolated
from the electricity supply either when
switched off at the wall isolator, or the mains
fuse is withdrawn from the socket.
Repairs to machines operating with
electricity, gas or steam should only be un-
dertaken by a suitably qualified service engi-
neer to ensure safety. Unauthorised repairs
could be dangerous.
M.-Nr. 04 506 754