Maintenance And Cleaning - HomeMatic HM-Sec-TIS Montageanleitung Und Bedienungsanleitung

To reset the sensor, you will have to use the configu-
ration software for resetting the central control unit.
The procedure to follow is described in the instruc-
tions for the central control unit software.
8

Maintenance and cleaning

This product does not require you to carry out any
maintenance, other than replacing the battery and
adjusting the inclination sensor, if necessary. Enlist
an expert to carry out any maintenance or repairs.
Clean the product using a soft, lint-free cloth that
is clean and dry. You can dampen the cloth a little
with lukewarm water in order to remove more stub-
born marks. Do not use any detergents containing
solvents, as they could corrode the plastic housing
and label.
30