Werbung
Note: Do not over inflate, over inflation is not covered under your warranty and could damage your awning!
INFLATION:
• To inflate your air tube, unscrew the top cap and attach the pump nozzle to the air inlet (as shown below). You are
now ready to pump your air tube up.
If your air tube deflates straight away check that the value is correctly fitted as this could lead to air escaping from the
tube.
DEFLATION:
• To deflate your air tube simply remove the air valve by unscrewing it from the tube.
Be careful when unscrewing the valve as twisting the valve and tube unnecessarily could cause unneeded stress on the
valve. When unscrewing the valve hold the tube in place with one hand and unscrew the valve with the other thus ensu-
ring the valve and tube are not twisted.
• When you screw the valve back in place be careful not to get it caught on the rim of the valve pocket as this can
stop you creating a seal with the valve and can lead to air being lost from the tube even though there is no punc-
ture.
If your air tube does deflate always first check that the valve is correctly screwed into place.
7
Werbung
