DeWalt DW079 Anleitung Seite 40

e n gli s h
safety instructions for lasers
WARNING! Read and understand
all instructions. Failure to follow all
instructions listed below may result
in electric shock, fire and/or serious
personal injury.
SaVE ThESE INSTRUcTIONS
• Do not operate the laser in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust
or fumes.
• Use the laser only with the specifically
designated batteries. Use of any other
batteries may create a risk of fire.
• Store idle laser out of reach of children
and other untrained persons. Lasers are
dangerous in the hands of untrained users.
• Use only accessories that are recommended
by the manufacturer for your model.
Accessories that may be suitable for one laser,
may create a risk of injury when used on
another laser.
• Tool service MUST be performed only by
qualified repair personnel. Repairs, service
or maintenance performed by unqualified
personnel may result in injury. For the location
of your nearest authorized D
agent, refer to the list of authorized D
repair agents on back of this manual or visit
www.2helpU.com on the Internet.
• Do not use optical tools such as a telescope
or transit to view the laser beam. Serious eye
injury could result.
• Do not place the laser in a position which
may cause anyone to intentionally or
unintentionally stare into the laser beam.
Serious eye injury could result.
• Do not position the laser near a reflective
surface which may reflect the laser beam
toward anyone's eyes. Serious eye injury could
result.
• Turn the laser off when it is not in use.
Leaving the laser on increases the risk of staring
into the laser beam.
• Do not operate the laser around children or
allow children to operate the laser. Serious
eye injury may result.
• Do not remove or deface warning labels.
If labels are removed user or others may
inadvertently expose themselves to radiation.
38
• Position the laser securely on a level
• Dress properly. Do not wear loose clothing
additional safety instructions
for lasers
• This laser complies with class 3R according
WALT repair
e
WALT
e
• Only qualified and trained persons are
• Do not use the laser for any purpose other than
• Before first use, check that the safety warnings
• As the beam of a class 3R laser provides high
• Always set up the tool at a position where the
surface. Damage to the laser or serious injury
could result if the laser falls.
or jewelry. Contain long hair. Keep your hair,
clothing, and gloves away from moving
parts. Loose clothing, jewelry or long hair can
be caught in moving parts. Air vents often cover
moving parts and should also be avoided.
WARNING: Use of controls or
adjustments or performance of
procedures other than those
specified herein may result in
hazardous radiation exposure.
WARNING! DO NOT DISASSEMBLE
THE ROTARY LASER. There are
no user serviceable parts inside.
Disassembling the rotary laser will
void all warranties on the product.
Do not modify the product in any
way. Modifying the tool may result in
hazardous laser radiation exposure.
to DIN EN 60825-1:2001-11 (max 5 mW,
600-680 nm). Do not replace a laser diode
with a different type. If damaged, have the laser
repaired by an authorised repair agent.
allowed to install, adjust and operate the laser
equipment. Areas in which class 3R lasers are
used have to be posted with an appropriate
laser warning sign.
projecting laser lines.
on the label have been formulated in your
language. Do not use the tool if it does not carry
the warnings in your language!
visibility over longer distances, the potential risk
of damage to the eye remains unchanged within
the radius of application.
laser beam cannot cross any person at eye
level. Be extra alert for the presence of stairs
and specular surfaces.