Suzuki Serie JIMNY Bedienungsanleitung Seite 217

ANHANG
For Australia
Built Date
Built date is located on Vehicle Identifica-
tion plate.
"Built Date" means – the calendar month
and the year in which the body shell and
power train sub-assemblies are conjoined
and the vehicle is driven or moved from the
production line.
13-1
Child Restraint
TOP TETHER
EXAMPLE
(1) Anchor fitting
Your vehicle is designed to accommodate
a child restraint on the rear seat. When
using a child restraint, carefully read and
follow the Installation Instructions attached
to it.
EXAMPLE
Anchorage location
Front
Anchorages are located on the floor of the
rear cargo area, along the outside edge.
81A2103
(1) 5/16" UNC-2B x 25 mm bolt (Optional)
(2) 5 mm thick spacer (Optional)
(3) Anchor fitting (Optional)
(4) Welded nut
According to ADR regulation, some anchor
point is originally equipped with the anchor
fitting and some isn't. If the anchor point is
not equipped with the anchor fitting and
you install a child restraint in that seating
54G174
position, it is essential to use the following
parts according to the requirements indica-
ted below.
• Spacer as shown in the illustrations.
(1)
(3)
(2)
(4)
81A196