Profibus Interface Status (Sle-Dp) - Siemens SLE / SLE-DP – SIMOLINK-Encoder Betriebsanleitung

SLE / SLE-DP – SIMOLINK Encoder
NOTICE
6.2.2

PROFIBUS interface status (SLE-DP)

Siemens AG GWE-477 763 4070.76 J
SIMOVERT MASTERDRIVES
02.2001
An illuminated POWER LED does not necessarily confirm that the
supply voltage level is correct. The operator is responsible for ensuring
that the voltage supply remains stable within the specified limits.
The status of the PROFIBUS interface on the SLE-DP is indicated via a
red LED on top of the housing next to the address switches.
Fig. 6-3 SLE-DP; PROFIBUS display
LED Description
ERROR
†
LED off:
SLE-DP is activated cyclically via the PROFIBUS
l
LED illuminated continuously:
SLE-DP is not activated via the PROFIBUS or there is a
communication error in the PROFIBUS network
Table 6-6 SLE-DP; status of PROFIBUS interface
Operating Instructions
TENS
ERROR
Start-Up
6-7