Yamaha YZ426F/LC Fahrer- Und Wartungs-Handbuch Seite 456

FRONT BRAKE AND REAR BRAKE
5 - 22
2. Install:
Brake lever 1
Bolt (brake lever) 2
7 Nm (0.7 m · kg, 5.1 ft · lb)
Nut (brake lever) 3
7 Nm (0.7 m · kg, 5.1 ft · lb)
NOTE:
Apply the lithium soap base grease on the bolt.
3. Install:
Locknut 1
7 Nm (0.7 m · kg, 5.1 ft · lb)
Circlip 2
New
NOTE:
Make sure the circlip is installed into the
groove a of the push rod.
After installing, check the brake lever posi-
tion. Refer to "FRONT BRAKE ADJUST-
MENT" section in the CHAPTER 3.
EC5A5400
Rear master cylinder
1. Install:
Reservoir hose 1
Reservoir tank 2
2. Install:
Master cylinder 1
Bolt (master cylinder) 2
CHAS