Network; General; Http; Data Flow - Abus TV7218 Installationsanleitung

Network

All changes made on this page cause a system reboot so that they can take effect. Make sure that the fields
are correctly filled before you click .
„Get IP address automatically" This can be tedious having to perform software installation whenever the
network camera starts. Therefore, once the network settings, especially the IP address, have been entered
correctly, select
"Use fixed IP address" then the network camera will skip installation at the next boot. The network camera
can automatically restart and operate normally after a power outage. Users can run installation wizard to
check the IP address assigned to the network camera.

General

„IP address" This is needed for network identification.
„Subnet mask" Defines whether the destination is in the same subnet. The default value is "255.255.255.0".
„Default router" Gateway for transmitting pictures to another subnet. An invalid router setting prevents
transmission to these destinations in different subnets.
„Primary DNS" Server of the primary domain name with which the hostnames are converted into IP
addresses.
„Secondary DNS" Server of the secondary domain name for generating a reserve copy of the primary DNS.

HTTP

„HTTP port" This port can be different from the standard port 80. If this port is changed, users must be
informed to ensure a successful connection. Example: If the administrator changes the HTTP port of the
security network camera with the IP address 192.168.0.99 from 80 to 8080, users have to enter
"http://192.168.0.99:8080" in the web browser instead of "http://192.168.0.99".

Data flow

„UDP audio channel port" This port can be different from the standard port 5002 if this is blocked by a
firewall.
„UDP video channel port" This port can be different from the standard port 5003 if this is blocked by a
firewall.
"url" http://"Network Camera"/setup/network.vspx"
Network Camera" is the domain name or original IP address of the security network camera.
30