Adjusting The Level Of The Effect Speakers - Yamaha DVX-S100 Bedienungsanleitung

ADJUSTING THE LEVEL OF THE EFFECT SPEAKERS

You can adjust the output level of each effect speaker
(center, rear left and right, and subwoofer) while listening
to a source.
CODE SET
SHIFT
HALL
1
SPORTS MONO MOVIE
5
PLAY MODE
/DTS
9
LEVEL
TOP MENU
LEVEL
u, d
CH
TEST
ON SCREEN
(U.S.A. model)
(While playing a source)
1
Press AMP.
2
Press LEVEL repeatedly to select the
speaker(s) you want to adjust.
Each time you press LEVEL, the selected speaker
changes and appears on the front panel display as
follows: center, rear right, rear left and subwoofer.
CENTER (Center speaker) ^ R SUR. (Rear right
speaker) ^ L SUR.(Rear left speaker) ^ SWFR
(Subwoofer) ^ CENTER (Center speaker)...
y
• Once you press LEVEL, you can also select the speaker(s) to
be adjusted by pressing d / u.
3
Press j / i to adjust the speaker output level.
• The control range for the center or rear left and
right speakers is from +10 dB to –10 dB.
• The control range for the subwoofer is from
+10 dB to –10 dB.
Notes
• When the speaker output modes for "1A CENTER" and "1C
REAR LR" are set to NON, and "1D BASS" to FRONT, the
output level of those speakers cannot be adjusted because there
is no sound coming from these speakers.
• When you adjust the output level with LEVEL, the settings you
made with the test tone will be changed.
• We recommend adjusting the speakers by following the steps
described in "Using the test tone" on page 20.
66
VIDEO 1
CD
AMP
DVD AMP
JAZZ ROCK ENTERTAINMENT
2 3 4
SETUP ANGLE MARKER
MOVIE 1 MOVIE 2
6 7 8
REPEAT A–B
SELECT MATRIX 6.1 STEREO
> – 10
0 CANCEL
GROUP PAGE
MENU
SET MENU
MUTE
PRESET
ABCDE
CH
ENTER
PRESET
B. BOOST
VOL
RETURN
j, i
I For 5ch Stereo
You can adjust the volume level for each channel in 5-
channel stereo mode.
Control range: 0 to 100%
Initial Setting: 100%
• CT level (Center level)
• RL level (Rear left level)
• RR level (Rear right level)
CODE SET
SHIFT
HALL
1
SPORTS MONO MOVIE
5
PLAY MODE
/DTS
9
TOP MENU
LEVEL
u, d
CH
TEST
ON SCREEN
(U.S.A. model)
(While playing a source)
1
Press AMP.
2
Press "4" button to select 5ch Stereo.
3
Press u / d repeatedly to select the
speaker(s) you want to adjust.
4
Press j / i to adjust the speaker output level.
Notes
• During the 5ch Stereo mode, the output level adjusted with the
test tone or LEVEL is replaced with the level adjusted in the
5-channel stereo mode.
• When the speaker output modes for "1A CENTER" and "1C
REAR LR" are set to NON, the output level of those speakers
cannot be adjusted because there is no sound coming from
these speakers.
VIDEO 1
CD
AMP
DVD AMP
JAZZ ROCK ENTERTAINMENT
4
2 3 4
SETUP ANGLE MARKER
MOVIE 1 MOVIE 2
6 7 8
REPEAT A–B
SELECT MATRIX 6.1 STEREO
> – 10
0 CANCEL
GROUP PAGE
MENU
SET MENU
MUTE
PRESET
ABCDE
CH
ENTER
PRESET
B. BOOST
VOL
RETURN
j, i