Sharp XV-Z12000 Anleitung Seite 28

XV-Z12000
No. Adjusting point
8 NTSC color
saturation
adjustment
9 PAL color
saturation
adjustment
10 SECAM color
saturation
adjustment
11 Check and
readjustment of
white balance
12 Color-related
operation check
13 Video-related
operation check
14 Operation check
of RGB
Adjusting conditions
1. Input split color bar signal.
INPUT 4
2. Select the following group
and subject.
Group: VIDEO1
Subject: N-COLOR
1. Input the PAL color bar.
INPUT 4
2. Select the following group
and subject.
Group: VIDEO1
Subject: P-COLOR
1. Input the SECAM color bar.
INPUT 4
2. Select the following group
and subject.
Group: VIDEO1
Subject: S-COLOR
1. Use the adjustment condi-
tions in the item 4.
1. Input the color bar to IN-
PUT4.
2. Select the following group
and subject.
Group: LINE
Subject: L1
1. Input the monoscope to IN-
PUT4.
2. Select the following group
and subject.
Group: LINE
Subject: L2
1. Input the RGB signal to
INPUT5.
2. Select the following group
and subject.
Group: LINE
Subject: L4
Adjusting procedure
1. Select the VIDEO 1 menu to check the value of N-
COLOR.
Fixed value: 100
1. Select the VIDEO 1 menu to check the value of P-
COLOR.
Fixed value: 94
1. Select the VIDEO 1 menu to check the value of S-
COLOR.
Fixed value: 90
Check that there is no deviation of the white balance.
1.Select L1 of the process mode LINE and press the
ENTER key on the remote control. Check the color
density (Color) and tint (Tint).
1.Select L2 of the process mode LINE and press the
ENTER key on the remote control. Check of Picture,
Bright, and Sharpness.
1.Select L4 of the process mode LINE and press the
ENTER key on the remote control. Check of Picture,
Bright, Red, Blue, Clock, Phase, H-POS, V-POS.
28