Attaching A Lens; Removing A Lens - Leica M-E Anleitung

aTTaChiNg a LeNS

1. Hold the lens by the fixed ring (1.11).
2. Align the red index button (1.11c) on the lens with
the unlocking button (1.1) on the camera body.
3. Then push the lens straight on in this position.
4. Turn the lens slightly to the right, and you will hear
and feel it click into place.

reMoviNg a LeNS

1. Hold the lens by the fixed ring (1.11).
2. Press down the unlocking button (1.1) on the
camera body.
3. Turn the lens to the left until its red index button
(1.11c) is aligned with the unlocking button.
4. Then pull the lens straight off.
Notes:
• Since the Leica M-E should always be protected
against ingress of dust etc. into the interior of the
camera, it is important always to have a lens or a
cap fitted to the camera body.
• For the same reason, lenses should be changed
quickly and in an environment that is as dust-free
as possible.
• The rear caps of the camera or lens should not be
stored in a pants pocket, as they may pick up dust
there, which can then get inside the camera when
attached.
111