Outputting Negative Images - JVC KY-F70B Bedienungsanleitung

Outputting negative images

It is possible to change the video signal which is output from the camera via MONITOR terminal
from positive to negative video.
MENU DOWN
UP MODE/SET
SCSI
REC
MODE
SEND AW/SEL
MENU UP DOWN SET
PLAY
FREEZE
LENS
MONITOR
REMOTE
DC IN
POWER
ON 1 2 3 4
SEE INSTRUCTION MANUAL
MONITOR terminal
- - - REC MENU - - -
1 : EXPOSURE . .
2 : WH I TE BA L ANCE . .
3 : FREEZE . .
4 : PROCESS . .
5 : SYSTEM SET T I NG . .
REC MENU screen
Menu item
- - - SYSTEM S ET T I NG
ON SCREEN :
MEMORY NUM
FRZ D I S PLAY : O N
PR IO R I T Y : D I S K
MON I T O R : F I N E
AREA : N AR ROW
BAR L EVE L : 0.7 V
NEGA : ON
SYNC ON G : OF F
ET . .
MENU RE S
V I DEO ME MORY CL EA
T ME AD J UST I
SYSTEM SETTING screen
1.
Press the MODE button to enter the REC mode (REC
lamp on), then press the MENU button for at least 2
seconds to display the REC MENU screen.
2.
Use the UP or DOWN button to select 5. SYSTEM SET-
REC lamp
TING (displayed in purple when selected), then press
the SET button.
The SYSTEM SETTING screen will appear.
3.
Press the UP or DOWN button to select NEGA (NEGA
will be displayed in purple when selected), then press
the SET button.
The set value will be displayed in purple, indicating that
it can be changed.
4.
Press the UP or DOWN button to set the value to ON.
The outputted image will be the negative image.
5.
Pressing the SET button will register the setting to the
memory.
MEMO
Pressing the MENU button without pressing the SET button
Set value will return the unit to its previous settings without confirm-
ing the changes.
- - -
6.
Press the MENU button twice to return to the normal
screen.
R . .
E43