Basic Operations; Recording Images To The Main Unit Memory - JVC KY-F70B Bedienungsanleitung

4. Basic operations

Recording images to the main unit memory

The camera's built-in memory has storage capacity for 5 images in the VGA mode and for 4
images in the SXGA mode. The image size to be recorded is 1360 × 1024 pixels in both modes
of SXGA and VGA. When the memory is full, a new image sent to memory will replace the oldest
of the stored images.
MODE
SCSI
REC
SEND AW/SEL MODE
MENU UP DOWN SET
PLAY
FREEZE
LENS
MONITOR
REMOTE
DC IN
POWER
ON 1 2 3 4
SEE INSTRUCTION MANUAL
FREEZE display
CAUTION
Images stored in memory will be deleted when the power is turned off.
E36
1.
Press the MODE button to enter the REC mode.
The REC lamp will light. (
REC lamp
MEMO
FREEZE The unit will automatically enter the REC mode when the power
is turned on.
2.
Press the FREEZE button.
An image output via the MONITOR terminal will be
grabbed and stored in the camera's memory.
At this time the REC LED will flash and FREEZE will
appear on the screen. To stop this message appearing,
set FRZ DISPLAY to OFF. (
3.
Cancel FREEZE
Press the FREEZE button a second time to cancel the
still image.
MEMO
It is possible to set the unit so that the still image is automati-
FREE ZE
cally cancelled. Set CANCEL in the FREEZE screen to AUTO
(1 s), (3 s), (5 s). (
4.
Output the image to an MO drive or printer, as neces-
sary.
( Page 38 Saving images from the memory to an MO/
®
Zip disk )
( Page 39 Outputting images from the memory to a
printer )
page 10 MODE button)
page 59)
Page 55)