Other Main Functions; Changing The General Settings (Psm); Basic Procedure - JVC KD-LH1101 Bedienungsanleitung

Changing the general settings
(PSM)
You can change the items listed on the table
below and on page 32 by using the PSM
(Preferred Setting Mode) control.
• The PSM items are grouped into six
categories—MOVIE, CLOCK, DISP (display),
TUNER, AUDIO, and COLOR.

Basic Procedure

1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(See pages 31 and 32.)
The next-step-operation
buttons start flashing.
2
Press number button to select one
of the PSM category.
The first-listed item in the selected category
appears.
Preferred Setting Mode (PSM) items
The PSM items are grouped into six categories—MOVIE, CLOCK, DISP (display), TUNER, AUDIO,
and COLOR. To select a desired item, first select the category where the desired item is listed.
Indications
Graphics Movie demonstration
KeyIn CFM Key in confirmation
Clock Hr Hour adjustment
Clock Min Minute adjustment
24H/12H 24 hours or 12 hours
Auto Adj Automatic clock setting

OTHER MAIN FUNCTIONS

3
4
5
6
Selectable values/items
All Demo
Long
12Hours
Off
Select the PSM item you want to
adjust. (See pages 31 and 32.)
• By pressing ¢
you can also move to other categories.
Adjust the PSM item selected.
Repeat steps 2 to 4 to adjust the
other PSM items if necessary.
Finish the setting.
Int Demo
Off
Short
Off
0 – 23 (1 – 12)
00 – 59
24Hours
On
CONTINUED ON THE NEXT PAGE
or 4
repeatedly,
Factory-preset See
settings page
Int Demo 8, 33
Long 33
0 (0:00) 9
00 (0:00) 9
24Hours 9
On 20
31