Simulating A Thermocouple - WIKA CEP 3000 Betriebsanleitung

6. Commissioning, operation

6.2.2 Simulating a thermocouple

A thermocouple cable has to be used in order to enable high accuracy calibration.
For maximum accuracy, wait for 10 minutes after switching on.
WIKA operating instructions, model CEP3000
Figure 1: Simulating resistances
Use the wires of the
thermocouple so that the
calibration is as accurate
as possible.
Figure 2: Simulating a thermocouple
Device to be
checked
Device to be
checked
17
GB