Sca 3501/3502M3 Adapter - Leica R9 Bedienungsanleitung

Setting flash exposure compensation on the

SCA 3501/3502M3 adapter

A flash exposure compensation is input and
activated using three switches (on the SCA
3502M3, these are covered by a flap). The first
switch is used to set the flash exposure compen-
sation in whole light values (EV steps), i.e. –3 EV,
- 2 EV, ..., + 3 EV. The second switch is for fine
1
setting in / EV steps (-
3
allowing all values from – 3
1
be set in / EV steps. To put the set values into
3
effect, the third switch is set to ON.
1 1
/ , 0 EV or + / ),
3 3
1 1
/ EV to + 3 / EV to
3 3
To indicate that a flash exposure compensation
has been set, a red LED lights up on the outside
of the SCA 3501/3502M3 adapter or, on SCA
3002 standard flash units, the respective sign
and value appear in its displays. A
appears in the viewfinder to the right of the flash
symbol.
162
or (2.2)