Inserting The Paper - Citizen CBM-272 Benutzerhandbuch

4.7 Inserting the Paper

CAUTION:
• Be sure to use the specified paper roll.
• Use of non-specified paper may not guarantee the print quality, printing head life,
and so on.
1
Hold the convexity on the rear of the printer cover, and raise it upward.
2
Cut the front end of the paper roll almost at a right angle.
CAUTION:
• The printer cover is not stationary (Opening/Closing). After detaching it, be careful
not to lose or break it.
• Do not insert a ragged or dog-eared end of the paper roll, because it could result in a
paper jam or insertion error.
Good
3
Make sure that the power is turned on.
4
Pull the head-up lever to this side to raise up the printing head.
5
If there is still some paper remaining after a paper-out indication, eliminate the
paper roll according to "4.8 How to Remove Remaining Paper Roll."
6
Insert the front end of the paper roll straight into a paper insertion slot.
7
Set the paper roll firmly in the paper holder.
Good Good
— 20 —
No Good No Good No Good