Adjustment; Steering Friction; Throttle Grip; Remote Control Lever Load - TOHATSU MFS 15C Benutzerhandbuch

ADJUSTMENT

ENOM00073-0

1. Steering friction

Adjust this lever to achieve the desired
steering friction (drag) on the tiller handle.
Move lever towards (A) to tighten friction
and move lever towards (B) to loosen fric-
tion.
A
A. Heavier
B. Lighter
ENOW00074-0
WARNING
Do not overtighten the throttle grip or
remote control tensioner or it could result
in difficulty of movement resulting in the
loss of control causing an accident and
could lead to severe injury.
ENOM00074-0

2. Throttle grip

Friction adjustment of the throttle grip can
be made with the throttle adjustment
screw.
B
ENOF00329-0
A
A. Lighter
B. Heavier
ENOM00075-0

3. Remote Control Lever Load

(Throttle friction adjustment screw)
To adjust the load of the remote control
lever, turn the throttle friction adjustment
screw on the front of the remote control.
Turn clockwise to increase the load and
counter-clockwise to decrease it.
A
1
1. Throttle friction adjustment screw
A. Lighter
B. Heavier
ENOM00076-0

4. Trim Tab Adjustment

I f s t r a i g h t - l i n e c r u i s i n g c a n n o t b e
achieved, adjust the trim tab located under
the anti-ventilation plate.
If the boat veers toward the right, direct
the trim tab towards A.
51
B
ENOF00330-0
B
ENOF00078-0