Inhaltsverzeichnis
Werbung
ESC i
[Function]
Identify Printer
[Code]
<1B>H<69>H
[Outline]
This command sends a printer identification code by 1 byte. It sends "A"(<41>H) in the P-
250 mode and "H"(<48>H) in the P-900R mode.
[Caution]
This command is available only serial interface in the P-250 mode and P-900R mode.
ESC x
[Function]
Select P-900R Mode
[Code]
<1B>H<78>H
[Outline]
The command or function following this command works as the P-900R mode.
[Caution]
This command can be canceled by the FS, GS, or ESC c command.
[See Also]
FS, GS, ESC c
Differences from P-250 mode
* If the paper end is detected with the serial interface, "#"(<23>H) will be sent every second.
If the paper end error is reset, sending will stop.
* With the ESC i command(Identify Printer), the one-byte transmitted character will be
"H"(<48>H).
47
iDP3310 User's Manual
P-250,P-900R
ALL
CITIZEN
Werbung
Inhaltsverzeichnis
