Introduction; Principle Of Measurement - HMM Diagnostics DRAFT-D35415 Bedienungsanleitung

I. Introduction
Thank you for having decided in favor of our smartLAB
Scale. This product enables you to measure your body weight as well as
content of adipose, content of water, content of muscle and bone mass.
Please read the instructions carefully before you first use the scale and keep
the instructions for a future use.

Principle of measurement

Your smartLAB
bioelectric impedance analysis (BIA). A weak and non-perceptible and,
therefore, not dangerous electric signal will be conducted through the whole
body. The scale identifies the electric resistance (impedance). Individual data
such as age, body height, gender or degree of activity allow to identify the
adipose content and other parameters.
Muscle tissue and water have a good electric conductivity and, therefore, a
lower resistance than bone- and adipose tissue because adipose cells and
bones hardly conduct current.
Please note that the values of our smartLAB
only an approach to the real medical values of the body. Only a specialist
who takes medical methods into account (e. g. computer tomography) can
identify the exact parameters like content of adipose, content of water,
content of muscles and bone mass.
The smartLAB
fit W Body Analyser Scale is an ANT+ and Bluetooth® Smart
®
device. It supports the ANT+ device profile and is compatible with receiving
devices (such as sport watches, PC and Smartphones) that support the
ANT+ weight scale device profile. With the integrated Bluetooth® Smart
the smartLAB
® fit W Body Analyser Scale can also sent data via BLE to a
corresponding receiver. You can then transmitt your values wireless to these
receiving devices. The smartLAB
correct data transfer technology for you.
® fit W Body Analyser Scale is based on the principle of the
® fit W Body Analyser Scale are
® fit W Body Analyser Scale will choose the
® fit W Body Analyser
26