Menu Settings - Renkforce RUCD-1804 Bedienungsanleitung

Setting the Time
• Keep the button PTY/CLK (11) pushed until the time is displayed and the hours flash.
• Set the hours by turning the rotary control (10). Push the rotary control (10) and adjust the minutes by turning the
rotary control (10).
• Push the PTY/CLK button (11) to save the settings.
OPEN button (20)
• Press this button to unlatch the control panel.
RESET function
• This function resets all settings to factory settings.
• Push the button RESET (22) with a pointy object (e.g. a straightened paper clip) in the following cases:
- when you have completed the installation and connection
- when the device does not react to the operation of buttons any more
- when the display shows undefined characters
b) Menu Settings
To select the menu settings, push the rotary control (10) briefly or for a longer time to call the two levels of the menus.
The first level serves to set more frequently used functions, while the second level only contains functions that are
needed less often.
Choose the options for the respective settings by turning the rotary control.
Depending on the source (radio unit, CD player, etc.) that is currently active, only some functions may be
available.
Menu items - Push the rotary control (10) briefly
VOL > BAS > TRE > BAL > FAD > LOUD > EQ > BEEP > STEREO/MONO > LOC/DX
• VOL controls the volume
• BAS controls the low frequency range
• TRE controls the high frequency range
• BAL controls the volume ratio between the right and left speakers
• FAD controls the volume ratio between the front and rear speakers
38