Carson Sbach 342 Betriebsanleitung Seite 30

Assembly screw
13
GB
Gasket
Ø 13.4*0.8 mm
Spinner
14
Make sure the screw is firmly fastened to avoid any incident.
Connecting the servo rod linkage
16
Connect the elevator and rudder servo clips. Use the outermost hole
on the output arm.
30 CARSON Sbach 342 • 500505023
Propeller
12*6
Propeller mount
Nut M6
Front wheel shaft mount
15
Then attach the spinner using the enclosed screws
(2 countersunk screws).
17
Note approx. 3 mm gap