Matrix Controls; Pot Test - Bosch MIC440 Installationshandbuch

MIC440 Explosion Protected CCTV Camera System| Installation and Operation Manual
Menu Controls (Panasonic Only)

Matrix Controls

The options here provide controls for a Forward Vision Matrix. The
Disable Alarm buttons will take the number provided in the upper input box, and
perform the specified function on that alarm input.
The Watch button can be used to change the input channel on a Matrix (1 to 16) to
the value specified in the lower input box.
Bosch Security Systems

POT Test

The
POT Test
Motor PWM, Motor Speed in both Pan and Tilt, and the PSU level inside the MIC.
All the results are plotted onto a continually updating graph on the page and the
current results shown in numeric values below. This process requires a reliable 2
Enable and
way communications link with the MIC.
Manual and Preset / Goto Controls
These work as per the controls on the Standard Controls page although instead of
stopping when released the MIC will continually move until a separate stop
command is sent. The numeric key pad controls also work whilst in pot test
although the learn preset method using the number keys does not.
Issue 7
tab is used as an engineering tool to determine the MIC's position,
EN | 39