Icon Series LTS 1.0
8 Technical Data
ICON IC 112 LA
Connections
Input impedance
Input sensitivity
Max. Input level
Frequency response +/- 3 dB
Frequency response +/- 10 dB
Sensitivity 1W@1m¹
Max SPL calculated¹
Max SPL peak¹
Max SPL¹
Amplifier Mid
Amplifier Hi
Limiters
MF Speaker
HF Speaker
Directivity
Crossover Frequency
Rigging points
Handles
Grille
Castors
Accessories
Dimensions (BxHxT)
Weight
ICON IC 118 BA
Connections
Input impedance
Input Sensitivity
Max. Input Level
Frequency response +/- 3 dB
Frequency response – 10 dB
Sensitivity 1W@1m¹
Max SPL calculated¹
Max SPL peak¹
Max SPL¹
Amplifier Sub
Limiters
Woofer
Pole mount
Handles
Grille
Castors
Accessories
Dimensions (WxHxD)
Weight
1) Measurements taken under half-space conditions
General Technical Data
Max. Power Consumption
Max. Current Consumption
Internal fuse
Mains voltage range
Mains connector
1x XLR Line In, 1x XLR Line Through, 1x XLR Sub Out,
2x BVNet RJ45 IN/OUT, 1x Ethernet RJ45 Internal System Guard
20 kOhm
+16 dBu, +4 dBu, 0 dBu, -10 dBu, variable
+22 dBu
134 Hz – 17 kHz (LTS System Filter)
108 Hz – 17 kHz
109 dB (120 Hz – 16 kHz)
139 dB, based on peak power handling capacity
136 dB SPL @ 10% THD
131 dB SPL @ 10% THD, 120 Hz – 12 kHz
134 dB SPL @ 10% THD, 120 Hz – 5 kHz
1x 1000 W / Class D @ 4 Ohm
1x 600 W / Class D @ 4 Ohm
RMS Limiter, Peak Limiter, Subsonic Filter
12" Neodym
1,4"
60° x 40° CD horn
900 Hz, 24 dB/ Oct.
Aeroquip
4, integrated
Metal Grille with black acoustic foam
Dolly with four 100 mm castors
ICON Tilt-Unit, 5°, 10°, 15°, dust cover
50 x 60 x 81 cm / 19-11/16 x 23-5/8 x 31-7/8"
49,9 kg/ 110 lbs. (without dolly)
1x XLR Input, 1x XLR Through,
2x Ethernet RJ45 Internal System Guard
20 kOhm
+4 dBu
+22 dBu
41 Hz- fx
33 Hz - fx
105 dB
138 dB, based on peak power handling capacity
138 dB SPL @ 10% THD, 90 Hz - 100 Hz
136 dB SPL @ 10% THD
1x 2000 W / Class D @ 4 Ohm
Subsonic Filter, System Controller with Peak Limiter
18" Neodym
Two M20 threaded base plates
8, integrated
Metal Grille with black acoustic foam
Dolly with four 100 mm castors
dust cover
50 x 90 x 81 cm / 20-1/2 x 28-1/2 x 28-1/8"
54,1 / 119,2 lbs (without dolly)
1050 W (IC 112 LA), 1880 W (IC 118 BA)
4,5 A (IC 112 LA), 8,1 A (IC 118 BA)
4 AT / 10 AT (IC 112 LA), 10 AT (IC 118 BA)
2 20 V - 240 V
Neutrik Powercon
This is to certify that
ICON IC 112 LA
ICON IC 118 BA
complies with the provisions of the Directive of
the Council of the European Communities on
the approximation of the laws of the Member
States relating to electromagnetic compatibility
according to EMC directive 2004/108/EC and
low voltage directive 2006/95/EC.
This declaration of conformity of the European
Communities is the result of an examination
carried out by the Quality Assurance Depart-
ment of STAMER GmbH in accordance with Eu-
ropean Standards EN61000-6-1, EN61000-6-2,
and EN 60065 for low voltage.
Magdeburger Str. 8, 66606 St. Wendel, Germany
Lothar Stamer Dipl.Ing.
Managing Director
St. Wendel, den 06/29/2009
Version 2.0 08/2008