Every attempt has been made to present within this service manual, accurate and up to date technical information. However, development on the Lombardini

series is continuos. Therefore, the information within this manual is subject to change without notice and without obligation.

The materials used by Lombardini to construct the engine's components undergo strict quality controls and the engine's assembly guarantees reliability and long

life.

The engine has been built to the machine manufacturer's specifications, and it was its responsibility to adopt all the measures needed to meet the essential

health and safety requirements as provided for by the laws in force; use of the engine for uses other than the one defined shall not be considered as compliant

with the use intended by Lombardini, who therefore refuses all responsibility for any injury arising from such an operation.

The information contained within this service manual is the sole property of Lombardini. As such, no reproduction or replication in whole or part is allowed

without the express written permission of Lombardini.

Information presented within this manual assumes the following:

1 - The person or persons performing service work on Lombardini series engines is properly trained and equipped to safely and professionally perform the

subject operation;

2 - The person or persons performing service work on Lombardini series engines possesses adequate hand and Lombardini special tools to safely and

professionally perform the subject service operation;

3 - The person or persons performing service work on Lombardini series engines has read the pertinent information regarding the subject service operations

and fully understands the operation at hand.

GENERAL SERVICE MANUAL NOTES:

1- Use only genuine Lombardini repair parts. Failure to use genuine Lombardini parts could result in sub-standard performance and low longevity.

2- All data presented are in metric format. That is, dimensions are presented in millimeters (mm), torque is presented in Newton-meters (Nm), weight is

presented in kilograms (Kg), volume is presented in liters or cubic centimeters (cc) and pressure is presented in barometric units (bar).

Inhaltsverzeichnis