Starting Operation; Maintenance And Service; Maintenance And Cleaning - Bosch PML LI Originalbetriebsanleitung

OBJ_BUCH-1197-002.book Page 12 Tuesday, August 10, 2010 10:12 AM
12 | English
Removing the Lamp Head (see figure F)
Firstly, switch off the cordless worklight and re-
move the battery. To remove the lamp head 1,
pull out the cable, lightly press release lever 16
upward and pull the lamp head toward the rear
off of the component.
Mounting with Pipe Clamp
(see figures B and G)
The pipe clamp 8 is used for fastening the cord-
less worklight to pipes, handrails, tent poles,
etc.
For optimal alignment of the light beam, the
pipe clamp can be swivelled up to 12.5° to the
right or left.
Mounting with Head Strap
(see figures B and H)
With the universal adapter 6 and the head strap
5, the cordless worklight can be used as a head-
lamp.
The universal adapter 6 can be tilted for optimal
alignment of the light beam.
Universal Adapter with Velcro Strap
(see figures B and I)
With the universal adapter and a Velcro strap,
the cordless worklight can be used anywhere.
The universal adapter 6 can be tilted for optimal
alignment of the light beam.
1 609 929 W51 | (10.8.10)
Operation

Starting Operation

Switching On and Off
To start the cordless worklight, press the
On/Off switch 11.
Working Advice
Lens Plate (see figure J)
The lens plate 13 is used to scatter or diffuse
the light when using the cordless worklight e.g.,
as a reading lamp.

Maintenance and Service

Maintenance and Cleaning

When the battery is no longer operative, please
refer to an authorised after-sales service agent
for Bosch power tools.
The cordless worklight is maintenance-free and
and contains no components that must be re-
placed or maintained.
To avoid damage, clean the plastic lens of the
cordless worklight only with a dry, soft cloth. Do
not use cleaning agents or solvent.
If the cordless worklight should fail despite the
care taken in manufacturing and testing proce-
dures, repair should be carried out by an author-
ized after-sales service agent for Bosch power
tools.
In all correspondence and spare parts orders,
please always include the 10-digit article
number given on the nameplate of the cordless
worklight.
Bosch Power Tools